工业离合制动器|张力控制系统|纠偏系统|安全卡盘气胀轴铝导辊|无锡市德利森精密机电有限公司

TENSION CONTROL SYSTEM

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Full automatic constant tension controller

The full automatic tension controller uses a number of advanced technologies in the world, special microprocessor, high speed 18 bit A/D converter, anti-interference automatic recovery technology, and PID no overshoot algorithm, so as to realize constant tension control. It is widely used in various industries, such as printing, packaging, paper making, textile, cable and so on. According to the difference of input signal, it is divided into full automatic tension controller LTC858 and semi-automatic tension controller LTC212.

Manual tension controller

The manual tension control is to adjust the excitation current of the clutch and brake by hand in order to get the control mode of the tension, which is accompanied by the change of the roll diameter at the time of winding and reeling. In addition, it is hoped that using the programmable controller D/A converter to control the excitation current of the clutch / brake, the external control voltage (0-10V) can be directly connected to the manual controller, and the automatic control can be carried

out.

Manual tension controller

The manual tension control is to adjust the excitation current of the clutch and brake by hand in order to get the control mode of the tension, which is accompanied by the change of the roll diameter at the time of winding and reeling. In addition, it is hoped that using the programmable controller D/A converter to control the excitation current of the clutch / brake, the external control voltage (0-10V) can be directly connected to the manual controller, and the automatic control can be carried

out.

Seat type tension sensor

Tension controlled crystal range is very wide and can provide you with accurate tension monitoring at any time. These crystals can build the most ideal tension monitoring solution to meet your needs through a simple combination. The analog display phase digital display can be used to transmit 0-10VDC or 4-20mADC signals to PLC or motor drivers.

Angle tension sensor

Tension controlled crystal range is very wide and can provide you with accurate tension monitoring at any time. These crystals can build the most ideal tension monitoring solution to meet your needs through a simple combination. The analog display phase digital display can be used to transmit 0-10VDC or 4-20mADC signals to PLC or motor drivers.

Tension signal amplifier

The tension signal amplifier is used to read the tension weak signal from the tension sensor. After the transmitter preprocessing, the signal is amplified by the fixed gain coefficient, and then transformed into a standard analog signal output (0-10V or 4-20mA) via the A/D conversion circuit to the motor, the controller, or the PLC. The sensor provides reliable power supply, and the power circuit has short circuit protection function.

Tension signal amplifier

The tension signal amplifier is used to read the tension weak signal from the tension sensor. After the transmitter preprocessing, the signal is amplified by the fixed gain coefficient, and then transformed into a standard analog signal output (0-10V or 4-20mA) via the A/D conversion circuit to the motor, the controller, or the PLC. The sensor provides reliable power supply, and the power circuit has short circuit protection function.

Semi-automatic tension controller

Semi-automatic tension controller - the control device uses a semi automatic control device with cumulative thickness detection. The initial diameter and thickness of the material are set in advance for the control device. When each scroll is rotated, the material thickness (reel) or the thickness of the material (reel) is added to the current volume. Close to the reel of the rotating detection of the proximity of the actuator, the calculation results to the magnetic powder clutch or magnetic powder brake as the actuator used to output the 0~24V voltage.

Manual tension controller

The manual tension control is to adjust the excitation current of the clutch and brake by hand in order to get the control mode of the tension, which is accompanied by the change of the roll diameter at the time of winding and reeling. In addition, it is hoped that using the programmable controller D/A converter to control the excitation current of the clutch / brake, the external control voltage (0-10V) can be directly connected to the manual controller, and the automatic control can be carried

out.